How To Level Ground For Rectangular Pool

This also shows how to level ground for a pool without digging. Mark the perimeter of the area to be leveled with spray paint. Chief obvious nature fact.

how to level ground for rectangular pool

Framing Pool Sand Base I Have A 12 X 24 Intex Pool And Hired An

Best Way To Level Ground For Pool Leveling Level Ground For Pool

17 Ways To Add Style To An Above Ground Pool Hgtv S Decorating

If a pool is installed on ground that is not level the pressure exerted on the side of the pool that is at the bottom of the incline could cause the pool wall to give out.

How to level ground for rectangular pool.

Luckily selecting the perfect spot for the pool measuring the place properly comprehending the fundamentals of preparing the spot and making sure the ground is even can make it easy to level ground for an above ground pool.
Avoid underground utility lines and overhead power cables.
Mark off an area with a diameter 2 feet 61 cm larger than your pool.
Remove all grass sod and other vegetation from the marked pool area with shovels or a powered sod cutter.

Its works really well and surprisingly easy.
Tie a spray paint can to the other end of the string.
What to use for leveling an above ground pool.
The most off level an above ground can get is around three to four inches off.

Tips for leveling your intex above ground swimming pool area with sand.
Tie a length of string about 6 inches longer than the radius of the pool to the stake.
Water is always level with the earth.
If you place vertical supports on sand they will dig in several inches leading to more bulge at the sides or uneven supports resulting in more stress on some parts of the pool.

Consider the drainage in the area.
Stay away from trees and stumps.
Level the sand wet down compact as shown on this page.
How to level ground for a pool choosing a good site beforehand check your local building codes.

We show what we did to level out the ground for an above ground swimming pool.
This means when the pool is filled on the one side the pool structure is three or four inches higher above the waterline than on the other side.
When installing an above ground pool in your backyard you must ensure the ground beneath it is perfectly level.