How To Patina Copper Red

Do not touch the surface that you want to patina. A red patina can be developed on copper with a torch and any number of fluxes. First and foremost clean your piece of brass or copper with either alcohol or acetone to remove any oils or dirt so that the patina is consistent throughout the piece.

how to patina copper red

Copper Red Desert Lostcowboys

Patina Samples Acid Patina

Red Patina On Copper Heat And Hot Water Nancy L T Hamiltonnancy

Dry for one day.

How to patina copper red.

Turn off the torch and take the copper over to the washing area.
Borax powder 20 mule team laundry detergent 3.
Put it upside down on something non scratchy wood silicone paper or grass.
Pour about one inch of ammonia into a pint or quart size glass jar.

Apply a thin layer of paste with a soft cloth and dry again for one day.
To achieve a green patina spray your copper with a mix of 2 cups vinegar 15 cups ammonia and 12 cup of salt.
Then clean the copper with soap and water and pat it dry with a soft cloth.
Heat resistant tongs or long needle nose pliers with rubber grips that you dont mind ruining 7.

Wash dry residue away under cold water using a soft brush.
Miracle gro plant fertilizer is an excellent oxidizer of copper.
Pieces of kiln brick or charcoal blocks.
Alternately apply the flux first then apply heat for a smoother color.

Copper is a brightly colored metal often used for decorative purposes including furniture artwork and jewelry.
Pieces of clean copper in different shapes and sizes i made some roses out of thin copper for this 2.
Over time the surface of copper will react with oxygen heat or other aspects of the environment to create a coating of color or patina.
Copper acetate can be made by mixing equal parts hydrogen peroxide and distilled white vinegar boil it for a moment or two then let it cool down a bit.

Water tap water is fine 4.
For a blue patina mix one part miracle gro with three parts water for a solution that you can spray or wipe onto the copper.
Wash off residue again.
15 g copper acetate 15 g copper sulfate 05 l solution of white vinegar diluted 5 12 with water how i made the ingredients.

Recipe for red patina on brass and copper.
This will help to achieve an even patina so skip this step if you want something more patchy.
For a green patina mix one part miracle gro with three parts red wine vinegar.
Copper red patina rinse dry when you have finished wait 2 minutes for the copper to cool a bit.

Then flip over the.
Rinse and cool the back briefly.
Apply paste to object with a soft brush giving a thick coating.
Apply thin layer and dry until good variegated patina is achieved.

When the copper glows red hot sprinkle on the flux for a speckled look.
A patina will form within 30 minutes and become permanent within 24 hours.
The heat is applied to the copper from below.