How To Stain Hardwood Floors

Dip rag or sponge into stain and apply stain to floor. If sanding by hand use 3 different grits of sandpaper 30 60 and 80. Use a broom dustpan to sweep away.

how to stain hardwood floors

How To Stain Hardwood Floors With Old Brewed Coffee Home Guides

How To Remove Urine From Hardwood Floors Northside Floors

Hardwood Floor Refinishing Project How Long Does It Take Valenti

After 5 or 10 minutes.

How to stain hardwood floors.

Apply stain to the hardwood floor in one 2 foot section at a time using a lambswool applicator.
Staining floor test spot.
Sand lightly and apply the second coat of polyurethane.
Vacuum floor between each sanding and when finishedstep 3 clean floor with mineral spirits and a soft cotton cloth to pick up any remaining dust or dirt.

Youll need to rough up the smooth hard surface from the first coat of varnish so that the second coat will adhere well.
The floor will not get darker if you flood it with an excess of stain or apply a second coat.
Still other contractors apply stain by squirting the floor with stain out of a clean condiment bottle and spreading it with a white pad on the buffer.
If you live in an older house that has carpeting over the hardwood floor.

Man opens a can of stain to do a test on the hardwood floor surface.
Sand lightly with a fine sandpaper like 220.
The amount of stain that a floor can absorb is finite.
Sweep vacuum wash.

How to stain a hardwood floor in 5 steps step 1 remove carpeting.
Here were using rags but some people prefer lambswool applicators.
Top the finish with a protective and glossy coat of polyurethane sealer.
Use a method called water popping in which you run a wet mop or cloth over.

Before you begin you may want to hang a plastic drop cloth.
Step 1 repair obvious defects such as nail holes cracks or gouges in the floor using a wood putty or fillerstep 2 sand floor in direction of grain of the wood.
Test the stain in an inconspicuous area of the floor or on a sample piece of wood before applying it to the entire floor.
How to stain a hardwood floor step 1.

Use a floor sanding machine and edge sander or sand by hand.
Remove dust with a heavy duty shop vac followed by rags dampened with mineral spirits.
How to stain and seal hardwood floors.
Using excess amounts or applying multiple coats of stain can cause the stain to bleed back where it wicks back up to the surface of the board as solvent begins to evaporate.

If youre using a waterbased stain.
Once the floor has dried apply the stain evenly.
Sand the floor completely and vacuum thoroughly to remove all sawdust.
Apply a second coat of polyurethane and allow to dry at least overnight.

Use a tack cloth to wipe up all dust.