How To Refill A Lighter

Once all pressure is released refill and you should be good to go. If it does not utilize a tip adapter. Do this outdoors for safety.

how to refill a lighter

Make You A Custom Refillable Bic Lighter With Refill Valve By

Firestash Miniature Waterproof Keychain Lighter

How To Refill Your Lighter

If you turn the lighter upside down you will see a small circular indent on the bottom.

How to refill a lighter.

Press firmly and maintain pressure until the hissing stops.
To refill your lighter please read and use the following instructions carefully.
Do not refill your lighter immediately after using it.
Fill the lighter for about five seconds.

The flame height adjuster on the bottom of the lighter should be set to minimum by turning.
Insert the nozzle of the refill canister into the refill port its an exact fit and orient the canister to be exactly parallel to the torch body.
Insert the pushpin or tack into the lighter valve a small circular indentation at the bottom of the lighter.
For those wondering why they cant refill their butane lighters its because you must first find a small solid tool to press against the valve on the lighter to release it of pressure.

Push the refilling valve with a screwdriver to let out.
First locate the refill nozzle and flame adjustment screw photo 1.
This is the lighter valve which needs to opened with a pushpin for you to refill the lighter.
Refilling your torch lighter.

Drain all existing fuel from the lighter using a pen small screwdriver or some other small pointed object by depressing the fuel refill nozzle photo 2.
After purging the chamber turn the lighter upside down so the refill port is facing the ceiling.
Place a pushpin in the hole and then place the base of the pin on a hard surface like a table.
Insert a pushpin into the valve at the bottom of the lighter.

If the lighter slips while youre filling it it will spray butane out and could very easily ignite.
Careful with this step because some fluid may be left in the lighter and run out once it is opened.
After ascertaining that it has some butane in it secure the refill bottle on the refill valve of your butane lighter.
After filling if you feel like your lighter isnt full repeat this procedure for another five seconds.

Hold the refill can at a 90 degree upside down angle as you perform the butane lighter refill.
Hold the lighter tight.
The bottom of the lighter should pop out.
A simple way to refill an empty lighter.

Pressing the lighter down onto the bottle will disengage the release valve on the bottles nozzle.
Make sure that the tip forms a perfect fit with the valve.
Turn it right side up and push it down on a hard surface such as a counter top or table.
When topping off be certain that you are going to make a solid connection.

Press down on the lighter firmly for about five seconds to refill the lighter.