How To Prep A Car For Paint Correction

In a word no not the way that we do it. This simple diagram illustrates the typical make up. If you are going to paint a car you will be doing a lot of sanding this fact must be accepted.

how to prep a car for paint correction

Tutorial How To Prep A Car For Polishing Ask A Pro Blog

Expert Paint Correction Seattle Paint Corrections Service

Before After Paint Correction Ceramic Pro Capitol Shine Blog

Whether youre touching up a couple scratches or looking at a whole new paint job there are a few important steps to take before you can begin painting a car.

How to prep a car for paint correction.

Start by building up majorly damaged spots with a.
Painting your own vehicle can actually be a simple process if youve thoroughly prepped the car for paint.
Sadly all of these things can leave the finish.
Choosing jds for your paint correction.

How to prepare the surface.
If the existing paint is in good shape it can usually be prepared with a fine scotch brite pad.
This is essentially a soft 500 grit pad that is used to give the existing paint a rough surface to grab onto.
If you plan to strip paint from the cars bodywork use 1200 grit paper or sanding pads to quickly remove the clear coat and paint.

In part 6 of hot rods ultimate get to paint and body we show you the correct way to sand prime and pick the best paint for your car.
Remove all forms of oil.
How to prep a car for paint.
What is car paint correction.

Use an ipa product or similar to remove any trace of residue for a perfectly clean surface.
Making sure you have the proper space and tools will also be highly beneficial to achieving a clean and timely paint finish.
In order to prepare the surface as best as possible its recommended to keep these rules in mind.
How to prepare a car for paint.

At the very least wipe down each panel with isopropyl alcohol.
Just wiping off the polish residue is not enough.
How to sand your cars bodywork.
If the finish of the car required a lot of claying or if you used a quick detailer as a clay lube which left a slick surface then i would recommend washing the vehicle one more time to remove any of the residue.

To prep the metal prior to paint.
To avoid the headache of trying to match the paint you want to apply to the existing paint on the car youll need to remove the primer and expose the bare metal.