How To Stain A Fence

How to stain a wood fence 1. Brush out any runs or drips. This will allow the stain to enter hard to reach grooves and recesses and ensure an even coat free of lap marks.

how to stain a fence

Fence Staining Diamond Outdoor Llc

How To Renew Wooden Fences The Family Handyman

Staining Services Spring Tx Wood Fences Stained

Apply the stain in two to three foot sections of the fence at a time taking care to back brush or re paint over uncovered areas left by the previous stroke with a wide brush.

How to stain a fence.

Fill a tray and use a roller to apply an even coat of stain to your fence.
Take the stress out of staining a fence with this easy guide.
Brush out the fence stain.
After the fence has been cleaned dried and sanded you can begin the actual staining.

How to stain a cedar fence applying the stain pour all of the stain carefully into a large bucket.
Using the pad brush or roller dip it into the wood stain then apply it to your fence in an event coat working your way from one fence board to the next.
Remove old stains wood finishes with behr premium wood stain finish stripper.
Choose a behr solid color or semi transparent stain or a behr transparent wood finish.

Spread canvas drop cloths on the ground beneath the fence.
Use full up and down brush strokes and work on one board at a time.
Scrub with a stiff bristle brush to remove dirt debris and mildew.
No matter the method you use make sure to apply an even coat to the fence.

Use a natural bristle brush to apply fence stain.
Allow the fence surface to dry.
Brush the stain backbrush into the wood grain and all corners and gaps.
Use a 4 inch wide trim roller to stain narrow surfaces and to cut in around fence boards.

If you have a very large fence you can work on different sections of the fence over time after letting the first section dry.
Stain the cedar.
If the weather is still dry begin staining your clean fence.
Best way to stain a fence photo 8.

Apply stain to broad surfaces using a inch nap roller.
Making your old fence look beautiful is easy with the right behr product.
Stir your stain with a clean stick or coat hanger.
Clean the fence surface by applying a cleaner a small solution of soapy bleach water may be all you need but seek out a fencedeck cleaner for tough stains.

You can also apply stain with an electric cup.
Focus on painting from the top of the fence to the bottom to prevent uneven dripping.
Rinse thoroughly with a high pressure nozzle attached to a hose or a pressure washer.
Cover the entire surface.

You are going to apply the stain using a brush roller or a hand pumped fence stain sprayer like the olympic premium deck care sprayer.